Combination 1 gang JUNG LS1912 “cone” classic brass
Description
Combination with toggle lever "cone", 1 toggle lever, LS 1912 range, classic brass
Combination includes:
1-gang frame ME 2981 C
1-cover kit ME 12-0 C K 25
1-insert 1 gang K 534 EU
1-KNX push-button interface, 2-gang, Secure-40002 1S E
Related products
-
KNX room controller LS TOUCH with frame LS 990, LS range, antique brass
with integrated 1-gang frame LS 990Only install as a single device, not suitable for combinations! Intended useOperation of loads... -
LED Driver DALI 1x12A LT-451-12A
Dimming interface: DALI. PWM digital dimming, standard DALI logarithmic dimming curve. OLED display, supporting auto-assigned/manual input... -
KNX room controller LS TOUCH with frame LS 990, LS range, aluminium
with integrated 1-gang frame LS 990Only install as a single device, not suitable for combinations! Intended useOperation of loads... -
Leakage sensor-LES 01
Intended useDetection of water penetration and leaksConnection to KNX push-button interfaces or other binary inputs with... -
N 148/12 – KNX USB Interface Din Rail mounting device-5WG11481AB12
The KNX USB Interface is a data interface between a PC or laptop and the KNX installation bus. It can... -
1-gang toggle push-button insert, 1-pole, 1-way NO contact with separate contacts for indicator light, without claws, low Voltage-K 534 EU
with screwless terminals for rigid wires up to 2.5 mm2 screw fixing only, without clawsinstallation into flush box... -
Combination with toggle lever “cube”, 2 toggle levers, LS 1912 range, chrome
Combination includes: 1-gang frame GCR 29811-cover kit GCR 12-5 E 22insert not included for 2-gang toggle... -
LED Driver DALI 4x5A LT-404-5A
LED Controller Dali CV 4x5A / Push. DALI bus standard: IEC62386. -
4 in 1 96W DALI DT8 LED Driver(Constant Voltage)
4 in 1 DALI DT8 LED driver, max. output power 96W totalIn compliance with IEC 62386-101:2014,... -
KNX room controller LS TOUCH with frame LS 990, LS range, matt snow white
with integrated 1-gang frame LS 990Only install as a single device, not suitable for combinations! Intended useOperation of loads... -
KNX Binary input, 8-gang-2128 REG
rail mounting device, 4 rail units8 inputs 12 … 48 V AC/DCAuxiliary voltage output DC 24 V (SELV) for polling floating contactswith status indicatorETS... -
Ekinex
Advanced IP-KNX interface Konnect4 for KNX and/or Control4 installations
Ekinex Konnect4 Native integration in Control4 of Ekinex devices and configuration in Composer Pro The Ekinex...