Advanced IP-KNX interface Konnect4 for KNX and/or Control4 installations
Description
Native integration in Control4 of Ekinex devices and configuration in Composer Pro
The Ekinex device range is now compatible with the Control4 ecosystem. In Composer Pro it is possible to configure Ekinex products and integrate them into a Control4 automation system, even making them interact with third-party devices.
A single driver for all our wall-mount devices
All Ekinex wall-mount devices with thermostats are programmable with our Composer Pro driver, which automatically recognizes the model and allows the operating parameters to be set.
All the programming done in Composer Pro
No Need for ETS: all programming can be done directly within Composer Pro!
Thanks to SDDP discovery, the Konnect 4 gateway and all devices connected to the BUS are automatically detected and added to the project. The supplied drivers allow you to download the configuration directly from Composer Pro, and offer all the connections necessary to realize the functions you want.
Advantages
Flexibility of combining EKINEX and CONTROL4 products in the same installation.
Very easy cabling for installers.
Enhancement of the Control4 proposal with design-oriented products.
The same devices can be used by KNX professionals (with ETS) and by non-experts directly in Composer Pro.
Maximum reliability being the solution based on KNX standard.
Win-win product offering for all markets, by fitting the different needs, styles and expectations of installers and end users.
Related products
-
Combination with toggle lever “cube”, 2 toggle levers, LS 1912 range, chrome
Combination includes: 1-gang frame GCR 29811-cover kit GCR 12-5 E 22insert not included for 2-gang toggle... -
KNX room controller LS TOUCH with frame LS 990, LS range, rouge rubia (32101)
with integrated 1-gang frame LS 990Only install as a single device, not suitable for combinations! Intended useOperation of loads... -
4 in 1 96W DALI DT8 LED Driver(Constant Voltage)
4 in 1 DALI DT8 LED driver, max. output power 96W totalIn compliance with IEC 62386-101:2014,... -
KNX Binary input, 8-gang-2128 REG
rail mounting device, 4 rail units8 inputs 12 … 48 V AC/DCAuxiliary voltage output DC 24 V (SELV) for polling floating contactswith status indicatorETS... -
Condensation sensor-BTS 01
Intended useDetection of water condensation on coolant lines in residential or functional buildingsConnection to KNX push-button... -
KNX room controller LS TOUCH with frame LS 990, LS range, le jaune vif (4320W)
with integrated 1-gang frame LS 990Only install as a single device, not suitable for combinations! Intended useOperation of loads... -
KNX room controller LS TOUCH with frame LS 990, LS range, matt snow white
with integrated 1-gang frame LS 990Only install as a single device, not suitable for combinations! Intended useOperation of loads... -
Ekinex
KNX Secure multifunctional presence sensor-EK-SG2-TP-P
With the KNX Secure multifunctional presence sensor with microwave technology it is possible to detect the... -
KNX room controller LS TOUCH with frame LS 990, LS range, matt graphite black
with integrated 1-gang frame LS 990Only install as a single device, not suitable for combinations! Intended useOperation of loads... -
Combination with toggle lever “cube”, 1 toggle lever, LS 1912 range, chrome
Combination includes: 1-gang frame GCR 29811-cover kit GCR 12-0 E 22insert not included for 1-gang toggle... -
Ekinex
“Virtual” pushbutton Signum
Description “Virtual” KNX-standard pushbutton, i.e. based on a borderless IPS touch display, in which each button... -
2-gang toggle multi push-button (insert), 2 x 1-pole, 2-way push-button with 4 floating 1-way NO contacts, rocker in neutral position, low Voltage-K 532-4 EU
with screw terminals for rigid and flexible wires up to 2.5 mm2 screw fixing only, without clawsinstallation into...